Spot 1600W Electric Radiant Heater
No Aggressive Red Light - Produces
a very ambient modest light
HEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters. The reduced light output is due to the use of a color matching grill screen in front of the satin surface carbon heating elements that can be either a black or white. They are midwave radiant heaters that produce heat almost instantly (less than 15 seconds) and are ideal for providing heat to outdoor areas such as partially open patios or balconies.
Configure & BuyBuy online and get it delivered to your door.
Efficiency Made Simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & Cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No Aggressive Red Light
Produces a very ambient, modest light based on double carbon heating elements.
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Power / Current
Max. Power In
This graphic shows the heating performance of Heatscope Spot 1600W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
AccessoriesIncludes everything you need to easily operate and protect your investment for many years to come.
How are the HEATSCOPE® heaters connected?
Electric heaters are hard-wired from the switchboard to an optional wall plate switch to allow you to easily turn them on.
Is the radiation emitted by electric infrared heaters dangerous?
No, infrared heaters are a safe source of heat. Infrared heat does not have a high frequency like ultraviolet rays and X-rays, which are known to be dangerous. HEATSCOPE® radiant heaters produce medium to medium-fast waves for a pleasant warmth and minimal light.
Why are the carbon fibres used in HEATSCOPE® radiant heaters better than other heating elements?
The carbon fibres have a lifespan of at least 10,000 operating hours. This is significantly longer than tungsten, halogen light tubes or quartz elements used in other outdoor heating systems. Carbon fibres produce immediate and comfortable heat when and where you need it.
What happens if my appliance requires service? Who do I contact?
Please contact our customer service department. We are always happy to help you!
How do I install my HEATSCOPE® heater?
All infrared heaters must be installed by a licensed electrician and in accordance with the installation and instruction manual.
Where is the power connector of HEATSCOPE® infrared heaters located?
The HEATSCOPE® VISION and Spot heaters have the power cable attached to the unit on the right and an on/off switch on the back of the unit.
Can I control HEATSCOPE® infrared heaters continuously with a standard dimmer?
HEATSCOPE® infrared heaters cannot be controlled with a standard dimmer due to the amount of power required.
HEATSCOPE® VISION and Spot heaters can be controlled with an on/off switch or via an infrared remote control with two switchable power levels, (on/off, 100%, 50%).
Can I cover my HEATSCOPE® heater?
No, electric heaters require adequate ventilation surrounding the heater at all times. Please never cover the appliance nor enclose it with insulating or similar materials.
How Can We
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.Live Chat
From product selection, to material sourcing, and project reviews, our team is here to help.
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
Can't make it to our showroom? Book an online consultation with our team of specialists.
Smart pricing, personalised support and unparalleled creative freedom.
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.