Vision 3200W Electric Radiant Heater
Subtle orange glow which is
only 30-40% of the light output
HEATSCOPE® Vision 3200W ambient heater emits medium-wave infrared light with its parallel carbon heating strands. Since the already low luminosity of less than 300 lux is still dimmed by the glass-ceramic front, a cozy atmosphere is created.
Efficiency made simple
HEATSCOPE® is committed to efficiency! All VISION, SPOT and PURE radiant heaters were developed in accordance with the newest findings concerning the mid-wave IR range. This means that between 90% and 94% of the energy used is turned directly into ambient heat.
All HEATSCOPE® design radiant heaters produce natural infrared heat in the (fast) mid-wave IR range. This means that the heat feels particularly pleasant and is effective exactly where it is needed – that’s directly under the first layers of skin, but not too deep in the tissue.
Inviting & cosy
Other radiant heaters use light tubes to produce heat as a by-product – at HEATSCOPE® we exclusively use innovative carbon technology: two carbon spirals are powered with an electric current, they begin to glow and produce a particularly pleasant warmth.
Output peaks are a thing of the past with HEATSCOPE® power heaters. Although the heaters start up slowly, they reach 100% in no time: the range of SPOT models take only 15 seconds, and the VISION & PURE range takes a maximum of 30 seconds owing to the glass front.
The separate model ranges are either delivered with their own IR remote control or with a 4-wire cable for integration into an external control system (output dependent).
Delivers pleasant heat without the distraction. Clean-cut, modern designs and colours easily blend into any decor.
All models are certified with an IP rating for protection against dust, splash-water, and wind.
No aggressive red light
Produces a very ambient, modest light based on double carbon heating elements.
Up to 94% of the energy used is turned into ambient heat and transferred directly to nearby people and surfaces for maximum efficiency.
Operate and sync your heater(s) with your smart device (compatible with Alexa and Google Assistant). *Internet connection and additional accessories required
Our radiant heaters come with an industry leading two-year limited warranty.
Power / Current
Max. Power In
This graphic shows the heating performance of Heatscope Vision 3200W heaters. Please note that the heat output always depends on a wide range of factors.
They include: Installation environment (indoors or outdoors, enclosed or open, wind-protected or wind-prone), installation height, radiation angles, weather, voltage fluctuations, etc.
Please consider all these factors in your planning.*All values are approximate. Max. temperature increases achievable in enclosed spaces at 16 °C (dependent on the respective installation conditions and mounting height).
AccessoriesIncludes everything you need to easily operate and protect your investment for many years to come.
How does the remote control work?
The intuitive remote control allows you to easily turn multiple HEATSCOPE® units on and off with the simple touch of a button.
Are there any guidelines that I must follow to install the radiant heater?
Your electrician must follow the installation instructions set by the manufacturer, and make all connections in accordance with AS/NZS 3000:2018 Wiring rules. Please refer to the installation manual.
Are HEATSCOPE® heaters supplied with a plug?
No, they are supplied with a power cable and must be connected to your electrical circuit. For installation use only the supplied accessories or original accessories approved by the Manufacturer.
Are HEATSCOPE® heaters water resistant?
All HEATSCOPE® VISION and SPOT radiant heaters are protected against dust and splash-water (IP44 and IP24)! In other words: the heaters require additional protection from above/behind against persistent or strong rain, such as a canopy or roof.
In general though a wall projection (or similar) is sufficient. If no rear protection is possible and the heater is to hang completely freely, a HEATSCOPE® weather protection shield is obligatory in all cases.
The weather protection shields are available in black or white and incorporate the shape and curvature of the rear side of the design radiant heater.
In this way, HEATSCOPE® VISION (IP44) and SPOT (IP24) heaters are optimally protected against wind and weather.
How many amperes does HEATSCOPE® radiant heaters draw?
- Spot 1600W – 13.91 amps at 100% power
- Spot 2800W – 12.17 amps at 100% power
- Vision 3200W – 13.91 amps at 100% power
- Pure 2400W – 10.43 amps at 100% power
Where do I buy HEATSCOPE® radiant heaters?
Which heater model is the best for me?
This depends on the installation environment. If you own an open terrace, where sometimes the wind is blowing, we highly recommend only the SPOT power heaters.
But if you want to heat your glass house, conservatory or loggia, we entrust the ambient heaters VISION to you. These perfectly match well covered areas.
A rule of thumb is: The more open the area the more open the heater has to be – even if the other model looks nicer and is pleasing you more.
How do I replace the carbon fibres of my HEATSCOPE® heater?
Replacement of the carbon fibre elements must only be handled by a professional. If one carbon element is not working, please contact our customer service department.
You May Also LikeCollection
Weathershield 3 BlackThe HEATSCOPE® weather shield is designed to protect the HEATSCOPE® heater from the elements in installations where no covering is possible.
Spot 2800 Lift FrameFrame for HEATSCOPE® Spot 2800 unique lift system solution.
300mm Extension Rods WhiteExtend the reach of your HEATSCOPE® heaters on high ceiling installations
Spot 2800 Lift Box (Case)Box case for HEATSCOPE® Spot 2800 unique lift system solution.
500mm Extension Rods BlackExtend the reach of your HEATSCOPE® heaters on high ceiling installations
Spot 2800W Electric Radiant HeaterHEATSCOPE® Spot radiant heaters produce a subtle orange glow which is only 30-40% of the light output of the traditional radiant heaters.
100mm Extension Rods WhiteExtend the reach of your HEATSCOPE® heaters on high ceiling installations
Weathershield 3 WhiteThe HEATSCOPE® weather shield is designed to protect the Heascope heater from the elements in installations where no covering is possible.
Dual Fixing Brackets (2 Heaters)Install two heaters in one mounting system using HEATSCOPE® Dual Fixing Brackets.
Weathershield 5 BlackThe HEATSCOPE® weather shield is designed to protect the HEATSCOPE® heater from the elements in installations where no covering is possible.
500mm Extension Rods WhiteExtend the reach of your HEATSCOPE® heaters on high ceiling installations
300mm Extension Rods BlackExtend the reach of your HEATSCOPE® heaters on high ceiling installations
How Can We
Step-by-step guidance to find the right solution for your needs, trade professional benefits, and ongoing support before and after your purchase.Live Chat
From product selection, to material sourcing, and project reviews, our team is here to help.
Our unparalleled support and versatile product range makes designing with fire simpler than ever.
Can't make it to our showroom? Book an online consultation with our team of specialists.
Smart pricing, personalised support and unparalleled creative freedom.
Enjoy exclusive discounts across our entire range of fireplaces and fire pits.